EMICODE is a trademark-protected seal for product classification for modern, solvent-free and low-emission laying materials and construction products. These include ...
learn more ...
To learn more about seminars and technical training with classroom and hands-on training please contact us:
Telephone: (704) 527 5919
Wakol can also be found now on...
Besides that the follower on @Wakol.Verlegewerkstoffe will be informed about upcoming appointments, workshops or fair participation.
Visit us on our new Facebook page!
We’re looking forward to your active participation, your likes, comments and ideas! Your opinion is important to us.
Wakol presents adhesive systems for the manufacturing of mattresses and upholstery
Wakol presents adhesive systems for manufacturing upholstery and mattresses at the upcoming interzum 2017 in Cologne.
INTERCOLL D 3447 Roller Adhesive – is a mattress adhesive for the manufacture of all types of mattresses. The water-based 1-C CR-Latex Roller adhesive is solvent-free and characterized by its superb tension stability when wet. The easy assembly and the process reliability are featured by the quick force build-up and the excellent instant tack.
INTERCOLL D 3386 for direct packing – has been developed for roller and spray application. The very fast drying of the adhesive makes a directly packaging of the mattress possible. It can be used as one-side or contact adhesive for all common mattresses and upholstery materials.
During interzum 2017 Wakol presents live two spray applications:
The 2-C CR-Latex Dispersion Adhesive INTERCOLL D 3453 is used in combination with INTERCOLL D 3437 Activator by spray-mix-application. It shows high initial strength for bonding foam materials in a short time.
INTERCOLL D 3460 is a 1-C CR-Latex Dispersion Adhesive can be used at a low spraying pressure, thus reducing the overspray and optimising consumption. The product can be applied using the "free-flow" method. In comparison to the mixed two-component adhesive, INTERCOLL D 3460 has a higher solids content and therefore a lower water content. This adds to a drying benefit.
Further information on Wakol at interzum www.interzum.de
WAKOL Sealing Compounds – expanded product range
Wakol presents at Metpack two new additions to its extensive Sealing Compound range.
- WAKOL D 3756 Sealing Compound for Beverage cans
- WAKOL PU 4320 / 4315 Sealing Compound for Food pails and drums.
WAKOL D 3756 Sealing Compound for Beverage cans
WAKOL D 3756 Sealing Compound is a water-based sealing compound based on SBR for beverage application and is suitable for the filling of mineral water, carbonated soft drink, beer as well as dairy products. It shows a very good performance using high throughput application machinery (up to 1500 epm / rotational multi-head liner) applying to small diameters.
It is formulated to achieve virtually no taste or odour influences on filling goods. Therefore WAKOL D 3756 Sealing Compound is suitable for taste-sensitive filling goods like e.g. mineral water.
It complies with latest regulatory requirements, according to European and FDA food contact regulations. TNO and Nehring certificates are available
It shows excellent performance on high-speed rotational multi liners due to low drying tendency on nozzles. Reject rates are exceptionally low. An excellent shear stability provides optimum performance through central supply systems.
WAKOL PU 4320 / 4315 Sealing Compound for Food pails and drums
WAKOL PU 4320 / 4315 Sealing Compound is a two-component, self-blowing polyurethane foam. It was especially developed to form gaskets for pails and drum covers with ring ladge application. For the product, full compliance for food contact according to European Food Contact law has been achieved.
As the foam shows a very good resistance against water, fats, oils and aliphatic solvents it can also be used for the sealing of packaging of aqueous-based products for technical applications, glycols, oils, aliphatic solvents and solid filling materials.
The reaction leads to an elastic and fine-porous gasket with a smooth surface. 2-C-Polyurethane technology offers several advantages: no oven needed, high form stability of the gasket, plasticizer free, low migration, PVC free.
The Wakol exhibition team is looking forward to inform you about the full product range and will be available for further details. Visit Wakol in Hall 3.0 Stand 3A34.
Further information on Wakol at METPACK www.metpack.de
Wakol participates at innovations@domotex2017 and will be presented with two products.
Wakol presents innovative products during DOMOTEX 2017 from 14th till 17th january in Hannover. The products will be shown at innovations@domotex2017 as well as on Wakol's stand in Hall 7 Booth A41 .
WAKOL MS 325 Silane Primer - the first roll- and spreadable MS Moisture Barrier with strengthening effect
WAKOL MS 550 Resilient and Rubber Flooring Adhesive - the first 1-C MS adhesive for LVT Floorings.
innovations@Domotex2017 presents innovative products the online as well as during the fair show in hall 9.
Application and laying technologies Innovative exhibitors at DOMOTEX 2017 are demonstrating how the latest-generation technologies enable floor coverings to be laid more quickly and straightforwardly. "We have seen some exciting products that stand out thanks to creative and smart approaches. ..." explains Stefan Diez , Jury Chairman and Product and industrial designer.
WAKOL presents it's newest products at Domotex 2017
At Domotex 2017, 14th till 17th January in Hannover, Germany, Wakol presents live on stage the first firm-elastic parquet adhesive for the Application out of a sausage (tubular bag): WAKOL MS 262 Parquet Adhesive, firm-elastic as well as the first 1-C-MS Adhesive suitable for the installation of LVT Flooring: WAKOL MS 550 PVC and Rubber Adhesive.
The products will be presented by experts 7-times a day at the joint stand of Loba and Wakol.
As part of the innovations@domotex2017 two Wakol Products will be shown.
An ergonomic workplace design raises the efficiency of employees. The increase of productivity and competitiveness are just some positive effects caused by this guarantor.
WAKOL MS 262 Parquet Adhesive, firm-elastic allows ergonomically processing in standing with all standard applicators. The reliable Wakol MS technology is optimised for sausages and convinces with a fast and precise adhesive application. The first firm-elastic Adhesive scores with a quick setting and a high initial grab. These advantages allow bonding of all relevant type of parquet flooring.
Due to its high inner strength enables it to more comfortably absorb any movement caused by expansion of the parquet flooring. Parquet flooring laid with firm-elastic adhesive has a smoother surface than flooring laid using standard elastic adhesive.
As of now it is possible to use a 1-component MS-Adhesive in demanding floor laying situations. For the first time it is not only possible to lay Resilient and Rubber Flooring but as well LVT flooring with WAKOL MS 550 Resilient and Rubber Flooring Adhesive securely. It doesn't matter whether you want to bond flooring on absorbent or non-absorbent subfloors, indoors or outdoors.
With the new product from Wakol flooring can be securely laid in areas with high requirements such as increased moisture entrance areas or high thermal load conservatories due to sunlight. Challenges such as areas with forklift traffic and heavy-duty requirements are overcome by the secure and stable bond.
WAKOL MS 550 Resilient and Rubber Flooring Adhesive is characterised by its very low squeezing tendency. For unavoidable work on the flooring imprints in the surface are kept to a minimum. LVT flooring is held securely in place right from the start thanks to the high suction adhesion and initial tack. Owing to the firm adhesive grooves of WAKOL MS 550 Resilient and Rubber Flooring Adhesive, residual indentations are kept to a minimum just as well as with a fibre-reinforced dispersion adhesive. Adhesive residues on the surface of the flooring can be removed completely whether fresh or hardened.
After covering the remaining adhesive and closing the container the adhesive can be used for subsequent installations.
Visitors at Domotex 2017 are able to see the new products for themselves. Wakol demonstrates together with Loba 7-times a day which products are a must in 2017. Visit Wakol in Hall 7 Stand A 41.
Further information on Wakol at DOMOTEX www.domotex.de
Wakol presents the updated version of the strong product line Flooring Adhesives.
Costumers are able to catch up on all products, which are offered by Wakol. This applies especially to the new product highlights , like the WAKOL MS 325 Moisture Barrier and WAKOL MS 550 Resilient and Rubber Flooring Adhesive . The product line is divided into the categories: subflooring preparation , resilient flooring adhesives , wood and cork flooring adhesives , accessories and tools , explanations and useful things to know.
As you can see: Wakol offers a huge product variety in flooring adhesives for the parquet and flooring laying crafts.
Product Line Flooring Adhesives 2016 as download .
Adhesive manufacturer WAKOL enters into strategic partnership with ARDEX Group which will ensure early company succession ...
Adhesive manufacturer WAKOL enters into strategic partnership with ARDEX Group which will ensure early company succession.
Ardex, specialist for building chemicals based in Witten, Germany acquires a majority interest in Wakol. Family owners who are currently active in the business continue to hold substantial shares.
With Ardex as partner Wakol strengthens its system expertise, its global footprint and therefore ensures a sustainable growth.
This cooperation holds big potential for for future growth for both companies.
Mark Eslamlooy, CEO of Ardex Group, is excited about the future together: “This cooperation with Wakol is a perfect way for us to increase our systems expertise in the flooring industry massively. I cannot imagine having a better partner because like Ardex Wakol stands for highest technical expertise, quality and innovation. This shared philosophy is the base for our future success.”
Wakol stays independent
Wakol continues to operate as independent entity. The current managing directors Christian Gross, Dr. Frederic Holzbaur, Dr. Martin Schäfer and Steffen Acker will continue to run the business. Company name, location, brand and sales strategy will not change. The point of contact for customers as well as suppliers will also stay the same.
Through this cooperation both companies will increase their expertise in the business segment flooring systems. Both brands will continue to focus on their existing distribution channels and invest in its further development. Also both companies will continue to offer their distinguished product portfolio under their own brand.
Wakols further business segments Industrial Adhesives and Sealing Compounds will also continue increase without change. The international network of the Ardex Group offers opportunities for growth there as well.
Christian Gross, CEO of the Wakol Group is convinced: „ With Ardex as partner we have a very promising prospective for the future and at the same time foster our culture as family owned business.“
Location in Pirmasens will be strengthened
Wakol’s current location in Pirmasens will be expanded to become Ardex’s development centre for flooring adhesives in Europe. It is also planned to expand Wakol’s existing manufacturing capacity into the Groups European production centre for flooring and industrial adhesives.
Base for a partnership are shared values like: quality, innovation, technical expertise, reliability as well as a clear strategic alignment. Strong similarities in the company culture are crucial prerequisites and guarantee the future success for the cooperation.
For more than 60 years, ARDEX has been the quality leader for an entire industry, offering excellent building chemicals with supreme processing reliability – the brand of choice for installers and wholesalers. ARDEX today is still an independent family-owned business. ARDEX is present in more than 50 countries around the world and has 2,200 employees. With its twelve major brands, the ARDEX Group generates total turnover worldwide of more than 540 million euros per year.
Wakol GmbH is a leading family owned business in the adhesive industry as well as in the packaging industry with a total turnover of 58 million Euros. In 2014 Wakol achieved a growth of 5.5%.
Wakol, headquartered in Pirmasens, Germany continuously increased the number of employees over the recent years to currently 190 employees. 160 of that are based in Pirmasens.
Besides Germany, Austria, Switzerland and the Netherlands which are core markets for Wakol’s flooring products Wakol is also active in USA and Poland.
Wakol develops, manufactures and distributes very successful Flooring products, industrial adhesives and sealing compounds. For 80 years Wakol stands for Quality and Customer service. Wakol was repeatedly able to develop industry changing innovations. The chosen markets and niches provide excellent opportunities for future growth.
EMICODE is a trademark-protected seal for product classification for modern, solvent-free and low-emission laying materials and construction products. These include ...
EMICODE is a trademark-protected seal for product classification for modern, solvent-free and low-emission laying materials and construction products. These include adhesives, levelling compounds, joint seals
and sealing materials, underlays, adhesive strips and parquet lacquers. The inspection symbol for environmental and interior hygiene has been awarded since 1997 by the GEV (German Registered Association for the Control of Emissions in Products for Flooring Installation) to products of manufacturers who subject themselves to strict quality controls and regular inspections. With regard to consumer and environmental protection, EMICODE provides an orientation aid for the assessment and selection of chemical construction products. The classification system is aimed at planners, consumers and tradesmen, is company-independent and competitively neutral.
The EMICODE breaks down into the following 3 emission classes, based on the strictly defined GEV test method (emissions test chamber) and the GEV classification criteria:
|EMICODE EC1 PLUS||very low emission level PLUS|
|EMICODE EC1||very low emission level|
|EMICODE EC2||low emission level|
Especially important is the best emission class, EMICODE EC1 PLUS.
Status 01 / 12
The TVOC thresholds for this class after 28 days are defined as follows: EMICODE EC1 PLUS for primers, for levelling compounds and for adhesives
as well as subfloors ≤ 60 μg / m3.
For laying materials fulfilling the requirements but which nevertheless must be labelled according to the pertinent directives, must bear warnings or from which VOC separates and is released in reactions, the suffix „R“ (= regulated) is added to the designation.
Many Wakol line products correspond to the best emission class, EMICODE EC1. They are subjected to especially strict controls according to DIN EN ISO 9001:2008, from the raw material stage to manufacture,
with respect to their emission characteristics as well as their superb, technical functionality.
The Wheelmark is a mark of conformity valid throughout the EU, confirming suitability of the respective product for marine equipment in accordance with Council of the European ...
The Wheelmark is a mark of conformity valid throughout the EU, confirming suitability of the respective product for marine equipment in accordance with Council of the European Community Directive 2014/90/EU on
marine equipment (EC Marine Equipment Directive – MED). To obtain this mark of conformity, a defined fire test must be passed. In addition to this EC type examination, monitoring measures carried out by an accredited body are required, e.g. a quality management system as per Module D. The support organisation for the Wheelmark is the IMO, International Maritime Organisation, an affiliate organisation of the UNO. For more information see http://www.mared.org
Connected Systems stands for harmonised system solutions from Loba and Wakol. Due to an intensive cooperation and the exchange of experiences ...
Connected Systems stands for harmonised system solutions from Loba and Wakol. Due to an intensive cooperation and the exchange of experiences in product development, our products go through a mutually agreed verification and validation process, which guarantees optimal security for laying. A list of the products which have the label “Connected Systems” can be found at
Loba-Wakol, LLC warrants to its original purchaser that, at the time of delivery by Loba-Wakol, LLC, the flooring adhesive products described in the Loba-Wakol, LLC Catalogue (“Products”) will conform to Loba-Wakol, LLC’s published specifications, which may be obtained at www.loba-wakol.com or www.wakol-usa.com or are available upon request at 1-800 230 6456 ...
Loba-Wakol, LLC warrants to its original purchaser that, at the time of delivery by Loba-Wakol, LLC, the flooring adhesive products described in the Loba-Wakol, LLC Catalogue (“Products”) will conform to Loba-Wakol, LLC’s published specifications, which may be obtained at www.loba-wakol.com or www.wakol-usa.com or are available upon request at 1-800 230 6456.
For the Products sold by Loba-Wakol LLC, Loba-Wakol, LLC provides the following warranties to its original purchaser for a period of 10 years for residential application and 5 years for commercial applications when those Products are selected, used, applied and cared for according to the requirements in this Limited Warranty:
1. Bond Warranty. The products will bond the appropriate flooring products within the limitations of Wakol’s most recently published product information, so long as the Products are used (a) with flooring products that are designed for and recommended in writing by the flooring manufacturer for glue down installations to subflooring that meet the requirements of NWFA and RFCI guidelines (“ Guidelines ”) and (b) in accordance with Wakol’s published specifications, technical data sheets, written directions for installation, use and maintenance, and labels on the Product (“ Instructions ”).
2. Moisture Damage Warranty. If the WAKOL PU 280 Moisture Barrier is used correctly in combination with the Products, Loba-Wakol, LLC warrants against moisture damage caused by moisture from the subfloor up to the specified limits in the Instructions for the Products. As mentioned below, as part of any claim for moisture damage, Loba-Wakol, LLC requires a successful subfloor moisture test prior to installation.
These warranties are specific to the Products described in the Catalogue and no other products, and the warranties are only provided to the person or entity that purchases it from Loba-Wakol LLC. These warranties are non-transferable. The Products must be installed by a professional installer only, and any installation by anyone not a professional installer voids the warranties.
In order for the Limited Warranty to apply, All Products must be selected, used, applied, installed, maintained and cared for in accordance with the Guidelines and the Instructions. The Instructions may be obtained at www.loba-wakol.com or www.wakol-usa.com or are available upon request at 1-800 230 6456. Immediately prior to using a Product for installation, the original purchaser or the professional installer must measure the moisture content through a calcium chloride and / or RH moisture test and confirm it is within the recommended range or the warranties are void. Do not install the product if the moisture test is outside the recommended range. The moisture test results must be retained by the original purchaser or professional installer.
The above warranties do not apply or cover damage to the flooring caused by excessive water (from such causes as broken water pipes, sink overflow, leaky plumbing, flooding, weather conditions, or improper maintenance).
The above warranties do not apply or cover any of the following: (a) Products that have not been installed in strict accordance with the requirements of this Limited Warranty; (b) Products that have been subjected to conditions of use or maintenance not in strict conformity with the Guidelines and the Instructions; or (c) Products that have been damaged by negligence, accident or other circumstances beyond the reasonable control of Loba-Wakol, LLC, including for example humidity or temperature.
Wood and cork flooring as natural products, as well as some other flooring materials, will expand and contract through seasonal temperature and humidity changes. Separations between floorboards or flooring units are a natural occurring condition and are not necessarily a defect and are not covered by this Limited Warranty.
The Moisture Damage Warranty does not cover failures from conditions of high alkali, hydrostatic pressure; vapor emissions above the limits specified by the Guidelines or the Instructions; unapproved flooring or subflooring; improper subflooring preparation; or improper installation.
Any repairs or replacement of flooring or subflooring without prior written authorization by Loba-Wakol, LLC will void the warranty. Any removal of the installed Products without prior written authorization by Loba-Wakol, LLC will void the warranty.
If within the applicable warranty period, the original purchaser discovers any problem in the warranted Products that may be covered by this Limited Warranty, the original purchaser should notify Loba-Wakol, LLC in writing of the alleged defects (at the address noted below). If Loba-Wakol, LLC determines that the Product is covered by this Limited Warranty, then Loba-Wakol, LLC shall, at its sole option and one time only, either repair or replace the nonconforming Product and the affected section of the floo or refund the purchase price paid for each defective Product and an amount up to the original cost of labor and material for the affected section of the floor. No warranty claims will be processed if received more than thirty (30) days after the applicable warranty period.
All warranty claims must be directed to:
521-C Eagletown Downs Dr.
Pineville, NC 28134, USA
Phone +1 704 527 5919
Fax +1 704 527 5922
Included in a claim should be the original purchaser’s name, address, telephone number, address of the installed Product, identification of the Product used, evidence of date of purchase or installation, name and address of the installer of the product, results of calcium chloride and / or RH moisture test performed prior to the installation and a statement of the complaint regarding the Product.
Loba-Wakol, LLC or its designated representative, shall have the right to examine the Products and the flooring (including testing of the flooring and subflooring) at the installation site with respect to any warranty claim. Any removal of the installed Products prior to such examination will void this warranty. Loba-Wakol, LLC may require its own moisture test or verification of any such test obtained by the original purchaser.
EXCEPT FOR THE EXPRESS WARRANTIES ABOVE, LOBA-WAKOL, LLC MAKES NO REPRESENTATIONS REGARDING THE PRODUCTS, THEIR USE OR PERFORMANCE AND DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS AND IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCTS, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
UNDER NO CIRCUMSTANCES WILL LOBA-WAKOL, LLC BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, PUNITIVE OR SPECIAL DAMAGES, INCLUDING LOST PROFITS. IN NO EVENT SHALL LOBA-WAKOL, LLC’S LIABILITY EVER EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT AT ISSUE AND AN AMOUNT UP TO THE ORIGINAL COST OF LABOR AND MATERIAL FOR THE AFFECTED SECTION OF THE FLOOR.
THE PURCHASER ACKNOWLEDGES THAT THE REMEDIES PROVIDED IN THIS LIMITED WARRANTY ARE IT‘S SOLE AND EXCLUSIVE REMEDIES, AND LOBAWAKOL, LLC’S SOLE OBLIGATION, FOR ANY BREACH OF REPRESENTATION OR WARRANTY, AND IS IN LIEU OF ALL OTHER REMEDIES.
Purchaser must bring any legal action for breach of warranty within the earlier of (a) one year after the claim or cause of action has accrued or (b) the period prescribed by the applicable statutes of limitation or repose.
Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives the purchaser specific legal rights. The purchaser may also have other legal rights, which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Air Quality Seal complying products meet the indoor ...
Air Quality Seal complying products meet the indoor air emissions criteria of:
· California Section 01350 Specification
· Collaborative for High Performance Schools (CHPS)
· Indoor Advantage Gold™ certification
· FloorScore label for low emission resilient and hard floorings
California Section 01350 Specification
The Department of Health Services expanded several sub-sections of the indoor air quality part of Section 01350 through the development of a Standard Practice.
Emission chamber tests are performed for VOCs and aldehydes after a 10 days Shelf life period, after (in total) 11, 12 and 14 days. The resulting air concentrations then are rated against the Chronic Reference Exposure Levels (CRELs ) concentrations published by the California Office of Environmental Health Hazard Assessment and procedures developed by the US EPA. Assuming that other products in an office or classroom may be sources of VOCs, CA Section 01350 compliance requires any products not to exceed one-half the allowable concentration limits. For details please see: http://www.calrecycle.ca.gov/GREENBUILDING/Specs/Section01350/
Collaborative for High Performance Schools (CHPS)
The Collaborative for High Performance Schools (CHPS) Criteria includes a credit for low-emitting materials. Schools projects that specify and install products that meet Section 01350 can claim up to 4 points towards CHPS certification.
For details please see: www.chps.net
Indoor Advantage Gold™ certification
Building materials such as adhesives and sealants, paints and coatings, textiles and wall coverings, and composite wood, as well as classroom and office furniture systems, components and seating that earn this SCS certification meet the indoor air emission criteria of California 01350, the California Indoor Air Quality (IAQ) Specifications For Open Panel Office Furniture, and LEED EQ 4.1, 4.2, 4.4, and 4.5. For details please see: http://product-testing.eurofins.com
FloorScore, developed by the Resilient Floor Covering Institute (RFCI) in conjunction with Scientific Certification Systems (SCS), tests and certifies hard surface flooring and flooring adhesive products for compliance with rigorous indoor air quality emissions requirements. Individual volatile organic compounds (VOCs) are evaluated using health-based specifications. Flooring and adhesives that earn FloorScore certification earn a legitimately enhanced market position, distinguished by the FloorScore certification label.
Under the FloorScore program, manufacturers must submit a written quality control plan, which includes strict requirements for supply chain management. This process strongly encourages the identification of
chemical sources, helping manufacturers to develop materials specifications. By purchasing input materials with low concentrations of the target VOCs, manufacturers gain increasing confidence that their products will meet criteria for certification. For details please see: http://www.rfci.com/int_FloorScore.htm
Indoor Environmental Quality specifications by ...
Indoor Environmental Quality specifications by LEED®, IEQ credit 4.1
There are VOC requirements for adhesives and sealants in the LEED® 2009 specifications for
· Commercial Interior
· New Construction
· Core and Shell
· Existing Buildings (in credit MR3)
These go for VOC content determination, where all volatiles are determined by weight loss after drying at 110 °C during 1h. Besides VOC, also water evaporates then. Therefore a water determination is added and all water is subtracted. Furthermore, all VOCs that are not relevant for ozone generation in ground-level atmosphere ("exempt compounds") are
subtracted. Limit values are different per product group and application.
Some examples of limit values (Volatiles minus water minus exempt
· Flooring adhesives 50 g / l
· Rubber floor adhesives 60 g / l
· Wood floor adhesives 100 g / l
· Indoor sealants 250 g / l
For details please see: www.usgbc.org
The Californian South Coast Air Quality Management District, (SCAQMD) is based in Diamond Bar and covering ...
The Californian South Coast Air Quality Management District, (SCAQMD) is based in Diamond Bar and covering Orange County and parts of Los Angeles, Riverside and San Bernadino counties. SCAQMD rules include
limitation of VOC content a.o. in adhesives (rule 1168), and are referenced by LEED and other sustainable building ranking schemes in the world. Purpose of this limitation is to protect urban outside air against
smog, especially against formation of ground level ozone. California Air Resources Board ARB offers a list with different VOC Limits for Architectural Coating categories that are valid in different California Districts, and a VOC calculator for achieving VOC content in agreement with their rules. There is no direct correlation between VOC content and the emission into indoor air over time. For that reason, LEED for schools and the US Green Building Initiative are specifying limit values for VOC emission into indoor air, mainly based on California Section 01350 specification. For more information aqmd.gov/.
The Bay Area Air Quality Management District (BAAQMD) is a public agency that regulates the stationary sources ...
The Bay Area Air Quality Management District (BAAQMD) is a public agency that regulates the stationary sources of air pollution in the nine counties of California’s (San Francisco Bay Area: Alameda, Contra Costa, Marin, Napa, San Francisco, San Mateo, Santa Clara, southwestern Solano, and southern Sonoma) and adopting air pollution regulations for the district. The Bay Area Air Quality Management District Rule Development Program develops regulations to improve air quality, meet federal and state air quality standards, reduce risk caused by emissions, and improve public health. The rules include limitation of VOC content a.o. in adhesives (regulation 8 rule 51). For more information see baaqmd.gov/.